MISTER SAWMILL
YOUR BEST SAWMILL VALUE!
424 Flinthill Place, Mountain Home, AR 72653
www.mistersawmill.com e-mail: mrsawmill@msn.com Phone: 870-424-4585
WHAT'S NEW SALE ITEMS MODEL 30 MODEL 26 HOME LUMBERJACK LINKS LOG ARCHES
MODEL 21
PORTABLE BAND SAWMILLS
Compare any of our mills with any other manufacturer. You will find more standard features built into our pricing, and many features not available at any price! See for yourself why we are
Your Best Sawmill Value!
THE 21B12P9E SAWMILL
Lots of standard features you pay extra for elsewhere! The MODEL 21B12P9E sawmill uses a smooth running and dependable 9 H.P. Honda single cylinder engine with charging circuit, electric start and a recoil start backup. The highway ready trailer package has a 2” ball hitch, lights, safety chains and a standard 4 prong flat plug for connecting to your tow vehicle, and easily adjustable jacks on each corner support the base during cuts - even on rough terrain. Our standard base handles logs up to12’ long, and 24” in diameter, and longer logs can be handled using bolt-on sections as required. Three commercial type squaring fences and two commercial type cam-action dogs (on the 12' version) assure solid performance and complete log holding at all times, and the base is heavy enough for the largest logs. There are even receivers installed on the base for such optional equipment as loading ramps.
Our Model 21 cutting head raises and lowers quickly and effortlessly, using a cable lifting mechanism. Cables are aircraft quality, with aluminum crimps and commercial cable stops for long life and secure operation. All alignments are accomplished through micro adjustable locking fittings that guarantee accurate and reproducible settings. With the standard trailer package, the mill tows smoothly behind a small car at highway speeds, and takes less than five minutes to set up once you reach your destination. Because of our compact design, these mills can be easily threaded down narrow trails to your remote building site using an ATV, a lawn tractor or even moved by hand on level ground.
Pull your model 21 into the orchard or woodlot and pack out the lumber; not the whole tree!
All the consumables are inexpensive on the model 21 saws too. New blades cost less than twenty dollars each, and they may be resharpened for about five dollars, so your cost per cut remains under three cents even with the increased gas prices. Maintenance costs are almost non-existent with these saws as well, since a small amount of grease every month or so is all you need to keep your saw operating smoothly. And our blade guides are arguably the best in the industry. Machined from solid bar stock and fitted with high speed bearings, these guides consistently work for four or five years of commercial service before needing maintenance, and then it is usually a fifteen dollar part that needs to be replaced. When you consider everything - the simplicity and ruggedness of our designs, a built-in trailer package, quality of workmanship, Honda engine, low costs and minimum maintenance - you'll see why we are your best sawmill value.
Yes, you can get colors to match your farm machinery!
NOTE: The saws shown above are the older 'T' post designs. The new SUPER 21 saws use a 4 post head for added stability, and have bases of 4" channel for cutting longer logs on a single piece base. And we didn't increase the price!
Strange aluminum trees growing in Nebraska!
Jim B. says he changed the blade on his saw to a metal cutting variety and made hundreds of dollars working a special job for a local company.
HOW TO READ OUR MODEL NUMBERS....
Our current model number system may be broken down into three distinct parts. An example of this is MODEL 21B12P9E seen below:
The first two numbers (21B12P16) denote the maximum log diameter the saw can handle between the guildes. In this case 21 inches.
The first letter/number combination (21B12P9E) give the maximum log length in feet: In this case, twelve. Total base length including tongue is 17 feet.
The second letter/number combination (21B12P9E) denotes horse power used on that saw. E is used to denote electric starting.
Because our saws may be configured with custom cut lengths and power plant options, the above allows us to generate a specific model number for your saw, and tie that to a serial number, thus insuring that we know exactly what saw you are operating should you have any problems.
STANDARD MODEL 21 PRICE LIST
MODEL 21 MILL EQUIPMENT PRICE EACH
| Model 21B12P9E mill with Honda 9 H.P. cylinder, electric start gas engine & trailer kit. Cuts 21" dia. x 12' long log. Has 3 fences and 2 dogs. | ..........................................$4,549.00 |
| Model 21B12X mill without engine, engine pulley or drive belt, but otherwise ready to run: use your own engine or electric motor. Cuts 21" dia. x 12' long log. Has 3 fences and 2 dogs, complete with trailer package. | ..........................................$3,649.00 |
| Model 21B12PE5 mill with 5 H.P. electric motor & trailer kit. Cuts 21" dia. x 12' long log. Has 3 fences and 2 dogs. | ..........................................$4,549.00 |
| Model 21B12E7.5 mill with 7.5 H.P. electric motor drive: Cuts 21" dia. x 12' long log. Has 3 fences and 2 dogs, complete with trailer package. | ............................ask for pricing |
| Model 21B12P9 mill with Honda 9 H.P. GX recoil start gas engine and trailer kit. Cuts 21" dia. x 12' long log. Has 3 fences and 2 dogs. | ..........................................$4,449.00 |
All of our mills can use engines other than those shown. If you have a particular engine manufacturer you like, let us know, and Call for particulars and current pricing. Electric motor drives are a great value if your saw remains stationary, and the trailer package allows you to move locations as long as an electric supply is available. Deduct $300.00 if you do not want a trailer package on your saw.
CHECK OUT OUR NEW 'LOGGERS PACKAGE' SPECIAL
MODEL 21 EXPANDED OPTIONS PRICE LIST
MODEL 21 MILL EQUIPMENT PRICE EACH
| Model 21B12P5E mill with 5 H.P. , 220 vac 3600 rpm electric motor and switching system. Cuts 21" dia. x 12' log. Has 3 fences and 2 dogs but NO TRAILER package on this one piece base.* This model shows the same cutting speed and power as a typical 9 h.p. gasoline engine, it's just quieter, smoother running, longer lasting and cheaper to operate. | .........................................$4,045.00 |
| Model 21B12PE7.5 mill with 7.5 H.P. , 220 vac 3600 rpm electric motor and switching system. Cuts 21" dia. x 12' log. Has 3 fences and 2 dogs but NO TRAILER package on this base.* This model shows the same cutting speed and power as a typical 16 h.p. gasoline engine, but quieter, smoother running, longer lasting and cheaper to operate. | .........................................ask for pricing |
| Model 21B12P9 mill with 9 H.P. Honda GX-270 recoil start engine. Cuts 21" dia. x 12' log. Has 3 fences and 2 dogs but NO TRAILER package on this one piece base.* | ..........................................$3,795.00 |
| Model 21B12P9E mill with 9 H.P. Honda GX-270 electric start engine. Cuts 21" dia. x 12' log. Has 3 fences and 2 dogs but NO TRAILER package on this one piece base.* | ..........................................$4,045.00 |
| Model 21X Base extension: Adds as many feet of cutting length as you need. Bolt on section to your requirements. | ........................................ $ 85.00 per ft. |
| Model 21B12X Mill: Complete mill minus engine, drive belt, drive pulley but includes trailer package. Add your own engine or electric motor and it's ready to go! | ......................................... $3,895.00 |
| Model 21B0 Mill: head and carriage without engine or base, for those who wish to build their own base and use their own engine. | .........................................$2,695.00 |
| Model 21B0P9E MILL: head and carriage with 9 H.P. Honda GX-270 engine with electric start. Complete saw head and carriage for customer built base. | ..........................................$3,395.00 |
| Model 21B0P9 MILL: head and carriage with 9 H.P. Honda GX-270 engine with recoil start. Complete saw head and carriage for customer built base. | ..........................................$3,195.00 |
| Model 21B0PE7.5: head and carriage with 7.5 H.P. electric motor. Complete saw head and carriage for customer built base. | ..........................................ask for pricing |
| Model 21 crating charge: needed if saw is to be shipped. | .........................................$ 150.00 |
| Blade Guides: Please see model 30 pricing for all blade guide parts. |
*NOTE: All standard model 21 bases must have 12 inches of clearance below them to accommodate dogs and fences. This is a departure from our previous bases which could be placed directly on the ground.** Total standard base length is seventeen feet (including tongue) end to end (twelve foot cutting length) for one piece bases. You can order this saw with cuts as long as 16' in one piece. You need to use bolt on extensions to extend the length of your saw beyond this point.
A five H.P. gas engine saw with a 20' base building a barn in Florida. A model 21B0P9E head/carriage on an owner built base. Cutting hardwood for sale and furniture wood in Florida, using an owner modified base.
WHAT'S NEW SALE ITEMS MODEL 30 MODEL 26 HOME LUMBERJACK LINKS LOG ARCHES