MISTER SAWMILL

YOUR BEST SAWMILL VALUE!

424 Flinthill Place, Mountain Home, AR  72653

www.mistersawmill.com     e-mail:  mrsawmill@msn.com        Phone: 870-424-4585

WHAT'S NEW     SALE ITEMS   MODEL 30    HOME   MODEL 21    LUMBERJACK     LINKS     LOG ARCHES

MODEL 26

PORTABLE BAND SAWMILLS

With all the capabilities you need, at a price you can afford.

Compare any of our mills with any other manufacturer.  You will find more standard features built into our pricing, and many features not available at any price!  See for yourself why we are

Your Best Sawmill Value!

  THE 26B12P16 SAWMILL

Lots of standard features you pay extra for elsewhere!    The MODEL 26B12P16 sawmill uses a smooth running and dependable  16 H.P. Briggs twin cylinder engine with charging circuit and electric start with a recoil start backup.  Contrast that with other companies that offer a 9 H.P.  or 13 H.P. manual start single cylinder engine, without a trailer package, for the same price!  The trailer package has a 2” ball hitch, lights, safety chains and a 4 prong flat plug for connecting to your tow vehicle, and easily adjustable jacks on each corner support the base during cuts - even on rough terrain.  Our standard base handles logs up to 12’ long and 28” in diameter,  is expandable up to 18' cut in a single piece, and additional sections may be bolted on as needed.  Three heavy duty squaring fences and two cam-action dogs (on the 12' version) assure solid performance and complete log holding at all times, and the channel section base is heavy enough for the largest logs.  There are even receivers installed on the base for such optional equipment as loading ramps or a log loading and rolling winch as shown below.  Want more horsepower?  The model 26 can take engines up to a 20 H.P. Honda without modification.

 Our Model 26 cutting head raises and lowers quickly and effortlessly, using a cable lifting mechanism powered through a self-braking winch that needs no ratchet.  Cables are aircraft quality, with aluminum crimps and commercial cable stops for long life and secure operation.  All alignments are accomplished through micro adjustable locking fittings that guarantee accurate and reproducible settings. The entire mill tows smoothly behind a small  car, and the average setup time is less than five minutes.  Because of the mills compact design, it can be  easily threaded  down narrow trails to your remote building site using an ATV or even a lawn tractor, but it is sturdy enough to last for decades and tow down the freeway at speed.

 The MODEL 26 is perfect for a one man sawing operation, be It light commercial or personal use. It’s ideal for building a home or cabin, making miles of potentially expensive wood fencing at minimal cost, or providing all the lumber you need for that new barn and corral. Cuts are incredibly smooth, accurate and reproducible every time.  The Model 26 mill is based on our very successful Model 30 design, and like its big brother, may be ordered with a variety of semi-custom layouts such as different engines or bed lengths to suit your needs.  This means you only pay for the mill you want, and not the one that may be in stock at the moment.  We invite your questions about modifications to suit your plans.

     The 16 H.P. Briggs twin cylinder electric start engine provides plenty of quiet, dependable power.              Using ramps and winch post to load a fifteen inch diameter log with little effort.

SOME FEATURES OF ALL MODEL 26 MILLS:

SUPERIOR DESIGN:

 We use the same general construction techniques in the Model 26 as in our Model 30 mills, giving you a solid, long lasting and time-tested design.  All of our mills use the same blade guides, blade types and adjustment systems, so you know the Model 26 is as good a value as the Model 30 mills that have such a solid reputation throughout the industry.  Our mills are designed using the most modern Computer Aided Design and drafting technology, and most parts are cut on our computer operated plasma cutting machine.  Each and every piece is fabricated to exactly suit the intended use and far exceed the calculated loads to which the part will be subjected.  And then every design is tested and retested in the woods around our shop to make certain that it works as intended.

 On all MODEL 26’s, a heavy industrial winch raises the head via a cable drive system that will remain trouble free for years due to the use of aircraft cable and aluminum fittings.  The gear reduction  used on MODEL 26’s makes it practically effortless to position the cutting head where you want it.  An automatic built-in winch braking system holds the head in position until you move it, without having to worry about slipping loads or flailing handles.   

VERSATILITY:

The MODEL26 may be purchased with a standard base (cutting) length of twelve feet, or you can order it with  optional  cutting lengths up  to 18'.  Additional lengths are available in bolt-on configuration if you need even more length.  You can have one with your favorite engine installed, or use the standard 16 H.P. Briggs, and you can get it with or without trailer package, jacks  etc. as you need.  You can even order just the head and carriage if you wish to build your own base, and without an engine should you already have a power plant you would like to use.  Since we build your saw to order, you can even have custom features on your mill that you will never find on production models, and the price is usually much lower than the standard products from other manufacturers.

VALUE!

The biggest and best feature of the Model 26 mills is value.  No other manufacturer gives you all the features we do at this fantastic price!  We invite and delight in comparisons with other manufacturers.  Note the standard 16 H.P. twin cylinder electric start engine, the full twelve foot of log length capacity (not just base length)  and the trailer package: All standard!  Then look at the low price and our solid reputation for warranty service and superior construction methods.  Compare it all, and you too will be convinced.   We are your best sawmill value.

Getting into tight spaces is easy with the Model 26

 HOW TO READ OUR MODEL NUMBERS....

Our current model number system may be broken down into three distinct parts.  An example of this is MODEL 26B12P16:

    The first two numbers (26B12P16) denote the maximum log diameter the saw can handle.  In this case 26 inches. 

    The first letter/number combination (30B12P16) give the maximum log length in feet:  In this case, twelve.

    The second letter/number combination (26B12P16) denotes horse power used on that saw.

Because our saws may be configured with custom cut lengths and power plant options, the above allows us to generate a specific model number for your saw, and tie that to a serial number, thus insuring that we know exactly what saw you are operating should you have any problems.

MODEL 26 PRICE LIST

MODEL 26 MILL EQUIPMENT                                                                                                     PRICE EACH

These mills can also use engines other than those shown.  Call for particulars and current pricing. 

MODEL 26 OPTIONAL EQUIPMENT

MODEL 26 MILL EQUIPMENT                                                                                                                  PRICE EACH

CHECK OUT OUR NEW 'LOGGERS PACKAGE' SPECIAL

( CLICK HERE FOR DETAILS)

PARTIAL MILLS and parts FOR OWNER COMPLETION

MODEL 26 MILL EQUIPMENT                                                                                                       PRICE EACH

WHY ARE WE SO INEXPENSIVE?

WHAT'S NEW     SALE ITEMS   MODEL 30    HOME    MODEL 21    LUMBERJACK     LINKS     LOG ARCHES